Date And Time Backup - Panasonic HX-WA10 Basic Operating Instructions Manual

HINT
To correct the date and time settings
1 Turn on the camera.
2 Display the Option Setting Menu 1 (see page 109 in the Operating
Instructions (PDF format)).
3 Select [CLOCK SET] and press the SET button.
h The screen to set the date and time appears.
h The current date and time settings are shown.
4 Select the line you wish to change, and make the correction.
If the camera's date and time are not set...
h The screen display and capture date information will show as follows:
* The date and time format is determined by the [DISP] setting specified
on the Clock Set Screen.
Recording Screen display: --.--.---- --:--
Photo capture date/time information: 01/01/2011 00:00:00
Video/audio file recording date/time information: 01/01/2011 00:00:00

Date and time backup

Under normal conditions, while the battery pack is being replaced, an internal
battery will maintain the date and time settings. However, there is a small
chance the settings may be lost (the backup will last for about 7 days). It is
recommended to check that the date and time settings are still correct after
replacing the battery pack and before shooting or recording of any type.
36
VQT3P46