Date And Time Backup - Panasonic Viera Link HX-WA10 Owner's Manual

HINT
To correct the date and time settings
1 Turn on the camera.
2 Display the Option Setting Menu 1 (page 115).
3 Select [CLOCK SET] and press the SET button.
h The screen to set the date and time appears.
h The current date and time settings are shown.
4 Select the line you wish to change, and make the correction.
If the camera's date and time are not set...
h The screen display and capture date information will show as follows:
* The date and time format is determined by the [DISP] setting specified
on the Clock Set Screen.
Recording Screen display: ---.--.---- --:--
Photo capture date/time information: JAN/01/2011 00:00:00
Video/audio file recording date/time information: JAN/01/2011 00:00:00

Date and time backup

Under normal conditions, while the battery pack is being replaced, an internal
battery will maintain the date and time settings. However, there is a small
chance the settings may be lost (the backup will last for about 7 days). It is
recommended to check that the date and time settings are still correct after
replacing the battery pack and before shooting or recording of any type.
HINT
About the internal backup battery
i This camera's internal battery serves to maintain the date and time
settings, as well as the shooting settings. To charge the backup battery,
leave the fully charged battery pack installed in the camera continuously
for about 2 days. In the fully charged state, the backup battery will maintain
the camera settings for about 7 days.
46
VQT3P35