Bosch PFS 5000E Original Instructions Manual page 20

OBJ_BUCH-2026-002.book Page 20 Friday, February 28, 2014 11:28 AM
20 | English
Symbols
Symbols and their meaning
The fine-spray system is suit- "Wood/glaze"
able for glazes and lacquers application:
and for wall paints. Spraying glazes, primers
and wood stains
Step 1: Choose the grey nozzle
Choose the correct nozzle cap 11 for a
cap "wood/glaze" application
Step 2: Select setting 1, 2 or 3
Set the spraying capacity on the thumbwheel 4 for
a "wood/glaze" applica-
tion
Step 3: Set "wood/glaze" appli-
Set the air flow cation at the air flow con-
trol 25
1 609 92A 0MW | (28.2.14)
The sticker regarding operation of the fine-spray system is located on the
base station. The correct interpretation of the symbols helps you operate
the fine-spray system better and more safely.
"Wood/lacquer" "Wall" application:
application: Spraying emulsion and
Spraying solvent-based latex paints
and water-dilutable lac-
quers, clear lacquers and
oils
Choose the black nozzle Choose the white nozzle
cap 12 for a "wood/lac- cap 10 for a "wall" appli-
quer" application cation
Select setting 1, 2 or 3 Select setting 4 or 5 on
on the thumbwheel 4 for the thumbwheel 4 for a
a "wood/lacquer" appli- "wall" application
cation
Set "wood/lacquer" ap- Set "wall" application at
plication at the air flow the air flow control 25
control 25
Detailed
description
See "Intended
Use", page 21.
See "Changing
the Nozzle Cap",
page 22.
See "Adjusting
the Spraying Ca-
pacity", page 23.
See "Adjusting
the Air Flow",
page 24.
Bosch Power Tools