Ricoh MP W7100 User Manual page 160

9. Troubleshooting
Message
"I/O buffer overflow"
"Insufficient Memory"
"Memory Retrieval Error"
If printing does not start, contact your service representative.
• The contents of errors may be printed on the Configuration Page. Check the Configuration Page in
conjunction with the error log. For details about how to print the Configuration Page, see "List / Test
Print", Print.
158
Cause
An input buffer overflow
occurred.
A memory allocation error
occurred.
A memory allocation error
occurred.
Solution
• In [Printer Features], under [Host
Interface], select [I/O Buffer],
and then set the maximum buffer
size to a larger value.
• Reduce the number of files being
sent to the machine.
Only when using PostScript 3
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
Turn off the power and then back on
again. If the message appears again,
replace the RAM. For details about
replacing the RAM, contact your
service representative.