17
SERVICE WORK ON THE ENGINE
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surface.
B00775-10
–
Insert oil filter
–
Lubricate the O-ring of the oil filter cover. Mount oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover (125 Duke)
Screw, oil filter cover (125 Duke)
Screw, oil filter cover (200 Duke EU,
200 Duke AR, 200 Duke ASIA,
B00776-10
200 Duke CN, 200 Duke MY,
200 Duke TH)
Screw, oil filter cover (200 Duke EU,
200 Duke AR, 200 Duke ASIA,
200 Duke CN, 200 Duke MY,
200 Duke TH)
Info
Too little engine oil or poor-quality engine oil results in premature wear of the
engine.
. Remove oil filter cover
out of the oil filter housing.
.
with the O-ring.
.
M5
8 Nm (5.9 lbf ft)
M6
12 Nm (8.9 lbf ft)
M5
8 Nm (5.9 lbf ft)
M6
12 Nm (8.9 lbf ft)
154