12
BRAKE SYSTEM
12.6
Checking the front brake linings
Warning
Danger of accidents Reduced braking efficiency caused by worn brake linings.
–
Change worn brake linings immediately. (Your authorized KTM workshop will be glad to help.)
12.7
Changing the front brake linings
Warning
Danger of accident Brake system failure.
–
Maintenance work and repairs must be carried out professionally. (Your authorized KTM workshop will be glad to help.)
Warning
Skin irritation Brake fluid can cause skin irritation on contact.
–
Avoid contact with skin and eyes, and keep out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
C00496-10
–
Add brake fluid to level
Guideline
Level
tainer rim)
Brake fluid DOT 4 / DOT 5.1 (
400379-10
–
Position cover
Info
Clean up overflowed or spilled brake fluid immediately with water.
C00496-10
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the front brake linings.
–
Check the brake linings for damage and cracking.
»
If damage or cracking is visible:
–
Change the front brake linings.
M00052-10
x
.
with membrane
.
.
(brake fluid level below con-
p. 95)
with membrane
5 mm (0.2 in)
. Mount and tighten screws
.
≥ 1 mm (≥ 0.04 in)
(
p. 59)
x
(
p. 59)
x
59
.