Removing The Lower Triple Clamp - KTM 2015 450 SX-F EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.9

Removing the lower triple clamp

–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Position the brake line and clamp. Mount and tighten screws
M00016-11
Finishing work
–
Install the front wheel.
x
Preparatory work
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove the front fender. (
–
Remove the handlebar cushion.
Main work
–
Remove screw
–
Remove screw
–
Take off the top triple clamp with the handlebar and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
102057-10
–
Remove O-ring
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
S00145-10
M8
( p. 65)
x
x ( p. 65)
( p. 36)
x
p. 41)
p. 41)
 .

.

. Remove protective ring

.
25 Nm Loctite ®
(18.4 lbf ft)

.
p. 34)

.
37
243™