4Wd Shaft Removal; Steering Hose Removal; Battery Code Disconnection; Front Axle Assy Removal And Reinstallation - Cub Cadet 7360SS Service Manual

1. FRONT AXLE ASSY REMOVAL AND REINSTALLATION

1-1 FRONT AXLE ASSY REMOVAL

(1) 4WD SHAFT REMOVAL

1. Remove cover A
2. Remove the snap ring at joint (rear side) from
the shaft groove.
3. Move the joint to front side and remove the
4WD shaft.

(2)STEERING HOSE REMOVAL

1.Remove the two hoses from steering cylinder

(3) BATTERY CODE DISCONNECTION

1. Disconnect Battery Code (Negative) and
loosen fixing bolts of bracket.
13