Download Print this page

Kenwood SMP06 Instructions Manual page 3

Hide thumbs Also See for SMP06:

Advertisement

Only use the Blender with the blade
assembly supplied.
Always use the Blender on a secure, dry
level surface.
Never place the appliance on or near a hot
gas or electric burner or where it could come
into contact with a heated appliance.
Misuse of your Blender can result in injury.
This appliance shall not be used by children.
Keep the appliance and its cord out of reach
of children.
Appliances can be used by persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and if they
understand the hazards involved.
Only use the appliance for its intended
domestic use. Kenwood will not accept any
liability if the appliance is subject to improper
use, or failure to comply with these instructions.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
Important - UK only
The wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
The appliance must be protected by
a 3A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
3

Advertisement

loading