Mv650I Using The Vl-3 Video Light (Optional) - Canon MV650i Instruction Manual

3_D73PAL_E(43-85) 02.12.26 9:26 PM Page 72
Using the VL-3 Video Light (Optional)
MV650i
This video light enables you to record brightly in colour even in dark places. This VL-3
E
Video Light attaches to the camcorder's
operation and is powered by the camcorder's power supply.
Refer also to the VL-3 Video Light instruction manual.
❍ Always turn off the camcorder before attaching/removing the video light.
❍ Do not touch or place flammable material or plastic close to the lamp or the
surrounding parts during or immediately after use; they become very hot.
❍ Do not look directly at the lamp while the video light is on.
❍ Do not carry the camcorder by the video light.
1. Slide the video light into the
accessory shoe until it clicks.
2. Tighten the fastening screw.
Be careful that the video light does not come
off when tightening the screw.
3. Set the camcorder to CAMERA or
CARD CAMERA mode.
4. Turn the video light's power switch
to AUTO or ON.
• (Connection) appears.
• ON: The video light stays on.
• AUTO: The video light turns on and off
automatically.
Downloaded From VideoCamera-Manual.com Manuals
72
advanced accessory shoe for cable-free
q
K
LOC
e
w
CK
LO
K
LOC
r
L O
C K