Recording From Analog Video Devices (Vcr, Tv Or Camcorder) - Canon MV650i Instruction Manual

4_D73PAL_E(86-98) 02.12.26 9:28 PM Page 88
MV650i MV630i MV600i

Recording from Analog Video Devices (VCR, TV or Camcorder)

E
You can record videos or TV programs from a VCR or analog camcorder on the tape in
the camcorder.
❍ Anomalous signals sent from the connected device may be recorded as
anomalous picture (although it may not appear so on the screen), or it may not
be recorded at all.
❍ You cannot record from tapes with copyright protective signals.
❍ Headphones cannot be used during analog line-in recording. If the
AV/headphones terminal set to [PHONES H], it will automatically switch to [AV].
❍ When connecting to a TV/video with SCART terminal, use a SCART adapter
with input capability (commercially available). The SCART Adapter PC-A10 is
for output only.
CAMERA
1. Connect the camcorder to the analog video device.
See Playing Back on a TV Screen (
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button on the wireless
controller.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected device: Play back the tape.
6. Press the PAUSE a button on the wireless controller
when the scene you wish to record appears.
7. Press the STOP 3 button on the wireless controller to
stop recording.
• Press the PAUSE a button on the wireless controller to pause
recording.
• Press the PAUSE a button again to restart recording.
8. Connected device: Stop playback.
Downloaded From VideoCamera-Manual.com Manuals
88
CARD CAMERA
PLAY (VCR)
39).
CARD CAMERA
AV INSERT AV DV REMOTE SET
REC
PAUSE
WIRELESS CONTROLLER WL-D79
ZERO SET
REW PLAY FF
MEMORY
12bit
STOP
AUDIO OUT
AUDIO DUB. PAUSE SLOW 2
AV INSERT AV DV REMOTE SET
ZERO SET
REW PLAY FF
MEMORY
12bit
STOP
AUDIO OUT
AUDIO DUB. PAUSE SLOW 2
AV INSERT AV DV REMOTE SET