SECTION 12.0
SENSOR SPECIFICATION
12.1 OPERATING SPECIFICATIONS. Follow all operating specifications,
especially for pH and flow rate as noted in the specification tables
below.
TECHNICAL SPECIFICATIONS
SENSOR
Dimensions:
Body Material:
Membrane Material:
O-ring material:
Cathode:
Anode:
Cable:
FLOW CELL
Dimensions:
Material:
Connections:
OPERATING SPECIFICATIONS
Operating temperature range:
Maximum operating pressure:
Flow rate minimum:
Flow rate maximum:
pH range:
Output signal:
Power Requirement:
Cross-Sensitivity:
Chemical Compatibility:
MAINTENANCE/REPLACEMENT PARTS
FC72
Flow Cell, 1/4 inch FNPT inlet and outlet, includes:
2 each 1/4" barbed tube fittings, clamp, threaded
flow cell installation fitting
FCL-ES
Free Chlorine sensor fill solution, 30mL, 1 each
FCL-RM
FCL Replacement premembraned cap, 1 each
Parts covered by this product instruction sheet include: FCLTX-100 Series
8.2"L x 1" dia
Black PVC
polyethersulfone
R
Viton
Gold
Silver chloride (AgCl)
2 -conductor shielded, 10ft (3mtr)
tinned wire leads
5.58"H x 2.25"DIA
Acrylic
1/4" NPT inlet and outlet
0-45 degC
1 bar/14.7 psi/1atm
.20 gpm
0.6 ppm
5.5-9.0
4.0+/- 0.2mA in air (zero)
20mA +/- 0.2mA at high range
(2, 5 or 10ppm)
12-24 VDC, 250 mA minimum
ClO2, ozone, bromine
up to 50% ethanol/water or
up to 50% glycerol/water
PRODUCT INSTRUCTION SHEET
FC72 FLOW CELL DIMENSIONS
SENSOR AND FLOW CELL INSTALLATION DIMENSIONS
M4679/0708 page 6 of 6