Roland VS-2480 User Manual page 8

VS-2480 Q&A
4. Rotate the TIME/VALUE dial to connect ANALOG
INPUT 1 2. ANALOG INPUT 1 and 2 are input to the
Input Mixer Channels 1 and 2.
5. In the same way, connect "ANALOG INPUT 3 4" to
"INPUT MIXER 3 4," "ANALOG INPUT 5 6" to "INPUT
MIXER 5 6," and "ANALOG INPUT 7 8" to "INPUT
MIXER 7 8." ANALOG INPUT 3, 4, 5, 6, 7, and 8 are
input to the Input Mixer Channels 3, 4, 5, 6, 7, and 8,
respectively.
6. Press [IN 1–16 (SOLO)].
7. Hold down [CLEAR] and press [CH EDIT] for Input
Mixer Channel 1. The level for Input Mixer Channel 1 is
set to 0 dB.
8. In the same way, set the levels for Inputs 2–8 to 0 dB.
9. Press [PLAY] to play back the project, and confirm that
sound from Inputs 1–8 is being output.
10. Press [MASTER EDIT (TR1-16)].
11. Hold down [REC] and press [STATUS] for Input Mixer
Channel 1. Track 1 enters recording standby mode (light
flashing in red).
12. In the same way, put Tracks 2–8 into recording standby
mode (light flashing in red).
13. Hold down [STATUS] for Input Mixer Channel 1. The
display switches to the Quick Routing screen.
14. Press [F4 (AllClr)]. All track assignments are cleared.
15. Press [IN 1–16 (SOLO)].
16. Press [SELECT] for Input Mixer Channel 1. Input 1 is
assigned to Track 1.
17. Press [STATUS] for Channel 2.
18. Press [SELECT] for Channel 2. Input 2 is assigned to
Track 2.
19. In the same way, assign Inputs 3, 4, 5, 6, 7, and 8 to
Tracks 3, 4, 5, 6, 7, and 8, respectively.
20. Press [HOME (DISPLAY)]. The VS-2480 switches to
Home condition.
21. Press [REC]. The VS-2480 enters recording standby
mode.
22. Press [PLAY]. Recording begins.
23. Press [STOP]. Recording stops.
8
'01-4 1st Edition 40452812