Advertisement
SS-SHAKE10/SHAKE30/SSSHAKEX10/SSSHAKEX30/SSSHAKEX70
REVISION HISTORY
Ver.
Date
1.0
2017.03
New
1.1
2017.06
Addition of Malaysia and Russian models (SSSHAKEX10).
Addition of 220-240 V AC area in E model, Malaysia, Russian and Thai models (SSSHAKEX30).
Addition of Malaysia and Thai models (SSSHAKEX70).
Change description of Ref. No. #1 in page 7, 8 and 9.
1.2
2018.09
Add Ref. No. 12 and 13 in page 7 (Service code changed).
Add Ref. No. 62 and 63 in page 8 (Service code changed).
Add Ref. No. 118 and 119 in page 9 (Service code changed).
1.3
2019.10
Add note for LOUDSPEAKER (15CM) and LOUDSPEAKER (38CM) in page 9.
Add note for LOUDSPEAKER (20CM) in page 7.
Change description of Ref. No. #1 in page 7, 8 and 9.
Change of SPK PARTY GB board and SPK PARTY LED board (suffi x 12).
Change P/N and description of Ref. No. 8 in page 7.
Change P/N and description of Ref. No. 107 and 111 in page 9.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a diff erent page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input ">001Z" in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
Description of Revision
, follow the procedure below.
SYS SET
Advertisement
