5) Other Settings
Other Settings
Ring Detect Timeout
duration" detected on N1 is larger than the standard
parameters or custom parameters, the call is detected
as ANSWERED.
*Standard parameters:
Settings" under PBX→Basic Settings→General Preferences
you can get the country's standard tone parameters.
Table 7-5 PSTN trunk-Other Settings
FXO (FXS signalled) devices must have a timeout to determine
if there was a hangup before the line was answered. Rang from
1000 to 8000.
Default: 8000.
N1 User Manual
when you configure the "Tone Zone
29