Table of Contents
Advertisement
Items
Call Waiting
DND
Enable Busy
Camp-on
Ring Out
Follow me
Caller ID Signalling
Echo Cancellation
Setting
Polarity Settings
Spy Settings
Description
Check this option if the extension should have Call Waiting
capability. If this option is checked, the "When busy" follow me
option will not be available. The call waiting function of IP phone
has higher priority than N1's call waiting function.
Do Not Disturb. When DND is enabled for an extension, the
extension will not be available.
If a dialed extension or a desired line is busy, with this feature,
when the extension or line becomes idle, your telephone will ring
automatically, so you can pick up to speak with the extension or
seize the line and dial an external number.
Check this option if you want to customize the ring time. Ring
tone will stop over the time defined.
Call forwarding for an extension can be configured here. The
administrator can configure Follow Me option for this extension.
If you want to transfer the call to an outbound number, please
follow the dial pattern of outbound route filled in the outbound
number.
For example: transferring to your mobile phone number
123456789, the dial pattern of outbound route is "9.", you should
fill in 9123456789 here.
This option defines the type of caller ID signaling to use.
•
FSK
•
DTMF
Disable or enable echo cancellation.
•
Polarity Answer
Whether to send polarity signal while picking up the phone.
•
Polarity Hangup
Whether to send polarity signal while hanging up the phone.
There are 4 spy modes available:
•
General spy
You have the permission to use the following 3 modes.
•
Normal spy
You can only hear the call, but can't talk
•
Whisper spy
You can hear the call, and can talk with the monitored
extension
•
Barge spy
You can hear the call and talk with them both
Example:
If 500 want to monitor extension 501, we need to enable the
"allow being spied" for 501, and choose the spy mode for
extension 500.
N1 User Manual
17
Advertisement
Table of Contents
