Bosch IXO Original Instructions Manual page 35

OBJ_BUCH-826-002.book Page 35 Tuesday, October 14, 2008 4:54 PM
Intended Use
The machine is intended for driving in and loosening screws.
Use the machine only when you can fully assess all func-
tions and handle them without limitation, or after having
received appropriate instructions.
Product Features
The numbering of the product features refers to the illus-
tration of the machine on the graphics page.
1 Screwdriver bit*
2 Tool holder
3 Rubber cap
4 Indicator for right rotation
5 Battery charge-control indicator
6 Indicator for left rotation
7 Suspension hook
8 On/Off switch
9 Rotational direction switch
10 "Power Light"
11 Battery charger
12 Eccentric driver head*
13 Angle driver head*
14 Torque attachment*
15 Torque presetting ring*
16 Torque-setting mark*
17 Release ring*
*Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accesso-
ries can be found in our accessories program.
Bosch Power Tools
English | 35
2 609 932 675 | (14.10.08)