Bosch IXO Original Instructions Manual page 33

OBJ_BUCH-826-002.book Page 33 Tuesday, October 14, 2008 4:54 PM
Safety Warnings for Screwdriver
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the pow-
er tool "live" and could give the operator an electric
shock.
Hold the machine with a firm grip. High reaction
torque can briefly occur while driving in and loosening
screws.
Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and
storage, set the rotational direction switch to the
centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
Protect the power tool against heat, e. g., also
against continuous sun irradiation and fire.
There is danger of explosion.
In case of damage and improper use of the battery,
vapours may be emitted. Provide for fresh air and
seek medical help in case of complaints. The vapours
can irritate the respiratory system.
When the battery is defective, liquid can escape and
come into contact with adjacent components. Check
any parts concerned. Clean such parts or replace
them, if required.
Bosch Power Tools
English | 33
2 609 932 675 | (14.10.08)