Common Problems And Solutions - Novatel MiFi 6630 Getting Started

Common Problems and Solutions

The following are some common problems and solutions.
My MiFi 6630 just powered off without my pressing the power button. Why?
This may occur under any of the following circumstances.
Pressing the Master Reset button
•
MiFi 6630 automatically restarting after configuration changes
•
Switching profiles
•
Restoring the configuration settings
•
Battery depletion
•
To restore battery power, follow these steps.
➊
Manually press and hold the power button to turn it back on.
➋
If the battery is depleted, charge the MiFi 6630 with the wall charger.
How do I reset the MiFi 6630 back to factory settings?
The master reset button is in a small hole located on the bottom of the MiFi 6630, underneath the
battery cover. This button returns the MiFi 6630 to factory settings, including re-setting the Wi-Fi
Name (SSID) and Wi-Fi Password. To reset the MiFi 6630, follow these steps.
➊
Place one end of an unfolded paper clip into the master reset button hole.
➋
Press the reset button with the unfolded paper clip until the display shows "MiFi Powering
Off" (about five to six seconds), then your MiFi 6630 will restart.
WARNING! The "Reset to Factory Defaults" operation overwrites ALL existing settings. If
the Wi-Fi settings change, you will lose this connection, and need to reconnect using the new
settings.
97