Common Problems And Solutions - Novatel MiFi 5510 User Manual

Common Problems and Solutions

The following are some common problems and solutions.
My MiFi 5510 just powered off without my pressing the power button. Why?
This may occur under any of the following circumstances.
Pressing the Master Reset button
•
MiFi 5510 automatically restarting after configuration changes
•
Switching profiles
•
Restoring the configuration settings
•
Battery depletion
•
To restore battery power, follow these steps.
➊
Manually press and hold the power button to turn it back on.
➋
If the battery is depleted, charge the MiFi 5510 with the wall charger.
How do I reset the MiFi 5510 back to factory settings?
The master reset button is in a small hole located on the bottom of the MiFi 5510, underneath the
battery cover. This button returns the MiFi 5510 to factory settings, including re-setting the Wi-Fi
Name (SSID) and Wi-Fi Password. To reset the MiFi 5510, follow these steps.
➊
Place one end of an unfolded paper clip into the master reset button hole.
➋
Press the paper clip on the button until the display shows "MiFi Powering Off" (about five to
six seconds), then your MiFi 5510 will restart.
WARNING!
The "Reset to Factory Defaults" operation overwrites ALL existing settings. If
the Wi-Fi settings change, you will lose this connection, and need to reconnect using the new
settings.
75