Firewall
The MiFi 6630 firewall determines which Internet traffic is allowed. The Firewall menu contains the
following sections:
VPN Passthrough — Turns ON/OFF the VPN feature and allows or disallows connected
•
devices to establish a VPN tunnel.
If ON, this feature allows VPN clients to connect through the MiFi 6630 to remote VPN
•
Servers. Normally, this option should be turned on.
If OFF, VPN clients are not allowed to connect.
•
IPv6 Transparent Mode — Allows connected devices to be accessible from the Internet.
•
DMZ (IPv4) — Allows the connected device specified as the DMZ IP address to receive all
•
traffic which would otherwise be blocked by the firewall.
DMZ (checkbox) — Use the checkbox to turn ON/OFF the DMZ feature.
•
DMZ IP Address — Enter the IP address of the connected device you wish to become the
•
DMZ device.
Save Changes — Use to activate and save new settings.
•
MiFi 6630 Settings Advanced - Firewall
63