Setting Time/Date - Olympus DS DS-3000 Online Instructions Manual

Setting Time/Date

If you have set the time and date, information as to when an audio file is recorded is stored
automatically with that file. The time and date should be set to ease audio file management tasks.
The time and date setting is also needed to perform the alarm playback function (
The hour indicator will flash automatically when you load batteries before using the recorder for
the first time, or after the recorder hasn't been used for a long time. To adjust the time, follow the
steps described below.
Time/Date Setup Screen
Hour
Month
P L A Y
S T O P
STOP
button
E R A S E
12
1
Minute
Year
Date
2
This completes the time setup procedure.
REC/SET
·····································································
button
(accepts a
Notes
choice and
• If you press the STOP button during the setup
moves on to the
operation, the clock will use the items that were
next item)
set to that point.
FF/+ or REW/–
• Each press of the NEW button during setting
button
toggles the display between the 12-hour and 24-
(alters a choice)
hour system.
Repeat steps 1 and 2 to set the
time and date:
Time and date setup proceeds in the
order of hour, minute, year, month, and
date.
1 Press the FF/+ button or REW/–
button to set a value.
2 Press the REC/SET button to accept
the value.
Press the STOP button to end.
P.34, 35).