6. Place the new hard disk drive, solid-state drive, or hybrid drive into the drive bay.
7. Slide the hard disk drive, solid-state drive, or hybrid drive horizontally and firmly into the connector
Ensure that the hard disk drive, solid-state drive, or hybrid drive is correctly seated in the bay and
secured by the hook
8. Reinstall the base cover assembly. See "Replacing the base cover assembly" on page 69.
9. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing a memory module
Before you start, print these instructions.
72
User Guide
a
. Then reinstall the screws
2
.
1
.