Setting Time And Date (Time & Date) - Olympus DS-2400 Instructions Manual

Setting Time and Date (Time & Date)
Setting the correct time and date on the recorder
is very important since every file recorded on the
recorder will have the time and date information
as part of the file header. This will simplify the
file management aspects later on.
The hour indicator will flash automatically
when you load batteries before using the
recorder for the first time, or after the
recorder has not been used for a long time.
PLAY/OK
F1, F2, F3 button
+ –
PLAY/OK, , ,
9, 0
button
Press the 9 or 0 button to select
1
the item to set.
Select the item from "hour", "minute", "year",
"month" and "day" with a flashing point.
Time & Date
10 14 2008
M D Y
5: 00
PM
BACK 24H EXIT
+
–
2
Press the or button to set.
Follow the same steps by pressing the 9 or
0 button to select the next item, and press
+
the or – button to set.
Time & Date
10 14 2008
M D Y
5 : 45
PM
BACK 24H EXIT
• You can choose between 12 and 24 hour
display by pressing the F2(24H or 12H)* button
while setting the hour and minute.
Example: 5:45 P.M.
5:45 PM (Initial setting)←→ 17:45
1
17