Machine's Basic Settings - Samsung ProXpress M4030ND User Manual

Machine's basic settings

• You change the machine's setting set in the machine from Samsung
Easy Printer Manager program or SyncThru™ Web Service.
- If you machine is connected to the local, you can set the machine's
setting from Samsung Easy Printer Manager > Advanced Setting
> Device Settings (see "Using Samsung Easy Printer Manager" on
page 220).
- If your machine is connected to the network, you can set the
machine's setting from SyncThru™ Web Service > Settings tab >
Machine Settings (see "Using SyncThru™ Web Service" on page 213).
After installation is complete, you may want to set the machine's default
settings.
To change the machine's default settings, follow these steps:
It may be necessary to press OK to navigate to lower-level menus for some
models.
1 Select (Menu) > System Setup on the control panel.
2 Select the option you want, then press OK.
• Language: Change the language that is displayed on the control
panel.
• Date & Time: You can set the time and date. They are printed on
reports. If, however, they are not correct, you need to change it for
the correct time being.
Enter the correct time and date using arrows or numeric keypad (see
"Keypad letters and numbers" on page 191).
• Month = 01 to 12
• Day = 01 to 31
• Year = requires four digits
• Hour = 01 to 12
• Minute = 00 to 59
• Clock Mode: You can set your machine to display the current time
using either a 12 hours or 24 hours format.
• Power Save: When you are not using the machine for a while, use
this feature to save power.
• When you press the power button or start printing, the product will wake
up from the power saving mode.
• When you press any button except power button, the machine wake up
from the power save mode. Press
Wakeup Event > On on the control panel.
• Altitude Adjustment: Print quality is affected by atmospheric
pressure, which atmospheric pressure is determined by the height of
the machine above sea level. Before you set the altitude value,
determine the altitude where you are (see "Altitude adjustment" on
page 190).
3 Select the option you want, then press OK.
(Menu) > System Setup >
2. Menu Overview and Basic Setup
30