Printing A Network Configuration Report - Samsung ProXpress M4030ND User Manual

Wireless network setup(Optional)
15
Using a network cable
See your network administrator, or the person that set up your wireless
network, for information about your network configuration.
Your machine is a network compatible machine. To enable your machine to
work with your network, you will need to perform some configuration
procedures.
Items to prepare
• Access point
• Network-connected computer
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
• Network cable

Printing a network configuration report

You can identify the network settings of your machine by printing a network
configuration report.
See "Printing a network configuration report" on page 131.
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your machine
using its MAC address to communicate with the machine. The MAC address is
the hardware serial number of the network interface and can be found in the
Network Configuration Report.
See "Setting IP address" on page 131.
Configuring the machine's wireless network
Before starting you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
To configure wireless networks, you can use SyncThru™ Web Service.
Using SyncThru™ Web Service
Before starting wireless network configuration, check the cable connection
status.
2. Using a Network-Connected Machine
150