Backlight - TOTALINE EZ3 Homeowner User Manual

END USER SETTINGS - BACKLIGHT
DEFINITION
Backlight Screen is used to allow the end user
access to change or view the backlight intensity
in Active and Dormant backlight modes. The
blue Active Backlight Wheel is used to adjust the
backlight intensity when the thermostat is in an
active state (being accessed or viewed by the
end user). The purple Dormant Backlight Wheel
is used to adjust backlight intensity when the
thermostat is in a dormant state (not being
viewed or adjusted by the end user).
DEPENDENCIES FUNCTION
None The Active Backlight Wheel allows for adjustment
from 10% to 100% of full backlight intensity, with 75%
being the default (and recommended) end user
setting. The Dormant Backlight Wheel allows for
adjustment from 0% to 25% of full backlight intensity,
with 25% being the default (and recommended) end
user setting.
From the dormant state, the active state will be
activated by either presence detection or by touch
activity. The dormant state will be entered after 15
seconds (default value) of inactivity and presence.
The 15 second timeout of inactivity can be changed
in the Settings – Advanced screen by adjusting the
Screen Timeout value. Presence detection can be
disabled in the Settings – Advanced screen by setting
the Proximity value to "NO".
13