Action At An Alarm Occurrence; Alarm Type - Panasonic WV-SBV131M Operating Instructions Manual

4 Action at an alarm occurrence

4 Action at an alarm occurrence
The alarm action (camera action at an alarm occurrence) will be performed when the following alarms occur.

4.1 Alarm type

•
VMD alarm: When motion is detected in the set VMD area, the alarm action will be performed.
*VMD stands for "Video Motion Detection".
•
Command alarm: When a Panasonic alarm protocol is received from the connected device via a network,
the alarm action will be performed.
IMPORTANT
•
When the camera is installed on a car, VMD will not function correctly when the car is moving.
4.2 Action at an alarm occurrence
Display the alarm occurrence indication button on the "Live" page
The alarm occurrence indication button will be displayed on the "Live" page at an alarm occurrence.
(®page 9)
IMPORTANT
•
When "Polling(30s)" is selected for "Alarm status update mode" (®page 42), the Alarm occurrence
indication button will be refreshed in 30-second intervals. For this reason, it may take a maximum of
30 seconds until the alarm occurrence indication button is displayed on the "Live" page at an alarm
occurrence.
Save images on the SD memory card
When an alarm occurs, images (JPEG/H.264) will be saved on the SD memory card. The settings to save
images on the SD memory card can be configured on the [SD memory card] tab (®page 48) of the "Basic"
page and the [Alarm] tab of the "Alarm" page. (®page 99)
Transmit an image onto a server automatically
An alarm image can be transmitted at an alarm occurrence to the server designated in advance. The settings
required to transmit an alarm image to a server can be configured in the "Alarm image" section on the
[Alarm] tab of the "Alarm" page (®page 99) and the [Advanced] tab of the "Network" page (®page 129).
Notify of alarm occurrences by E-mail
Alarm E-mail (alarm occurrence notification) can be sent at an alarm occurrence to the E-mail addresses
registered in advance. Up to 4 addresses can be registered as recipients of the alarm E-mail. An alarm image
(still picture) can be sent with the alarm E-mail as an attached file. The settings for alarm E-mail can be
configured in the "E-mail notification" section on the [Alarm] tab of the "Alarm" page (®page 99) and the
[Advanced] tab of the "Network" page (®page 126).
22 Operating Instructions