Configure The Settings Relating To Http Alarm Notification - Panasonic WV-SBV131M Operating Instructions Manual

[Alarm area No.]
•
Available range: 1-4
•
Default: 1
IMPORTANT
•
When entering the host name of the "Destination server address", the DNS settings on the [Network]
tab of the "Network" page must be configured. (®page 121)
•
Confirm that the destination IP addresses are registered correctly. When a registered destination does
not exist, notification may be delayed.

13.4.2 Configure the settings relating to HTTP alarm notification

HTTP alarm notification
[Address 1] - [Address 5]
Enter the destination IP address or host name of the HTTP alarm notification. Up to 5 destination server
addresses can be registered.
•
Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
•
Default: http://
Example of entry: "http://IP address of the HTTP server + : (colon) + port number" or "http://Host name: (colon)
+ port number"
[Alarm] checkbox
When the checkbox is checked, the HTTP alarm notification will be provided upon an alarm occurrence.
[Delete] button
When this button is clicked, all configured information, including the address, user name, password, and
notification data, will be deleted.
13 Configure the alarm settings [Alarm]
Operating Instructions 111