Using Psadmin - TP-Link tl-ps110p User Manual

18. Go to General; click Print Test Page to verify the configuration.
1 9. Done.
Note:
If you want to install more print servers, start setup wizard from your Windows Start menu
start -> All Programs -> Network Print Server -> PSWizard and repeat the installation
p rocedure.

Using PSAdmin

After the software of setup CD is successfully installed, starts PSAdmin utility from your
Windows Start menu: start -> All Progra
s creen will then appear as follow picture.
All print server(s) feature Novell NetWare function on the LAN will be displayed along w
their respective device name, MAC Addres
s tatus. The terms are defined as follows:
D evice Name: The name of the print server hardware used for identification purposes.
M AC Address: The Ethernet address of the print server.
P rint server Name: The print server to which the device is attached.
V ersion: The firmware version of the print server.
S tatus: To come up a Printer's status presently.
ms -> Network Print Server -> PSAdmin. The
s, print server name, firmware version, and
16
:
ith