TP-Link tl-ps110p User Manual page 51

system.sysLocation
snmp.snmpEnableAuthen
Users can set up print server's SNMP functions by using their browsers.
1. Click Setup, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.
SNMP Community: The print server supports up to two community names. The defau
Support HP WebJetAdmin: This option allows user determine to disable/enable the
S NMP Traps: Enable the function of sending SNMP Authentication Failure trap message to
the network administrator, if the community name within a SNMP request is
not correct.
Indicates the location of the print server.
Traps
Enables or disables the function of sending SNMP Authentication
Failure trap message to the network administrator, if the
community name within a SNMP request is no
community name is public (case-sensitive), with Read Only acc
right in default.
Support HP WebJetAdmin.
44
t correct.
lt
ess