Ap Router Configuration - ARGtek ARG-1210 Quick Installation Manual

AP Router configuration

The AP Router is delivered with the following factory default parameters on the Ethernet LAN
interfaces.
Default IP Address: 192.168.1.254
Default IP subnet mask: 255.255.255.0
Web login User Name: <empty>
Web login Password: <empty>
The device has three operation modes:
1, Gateway
2, Bridge
3, WISP
The default IP addresses for the device are 192.168.1.254, and you need to make sure the IP
address of your PC is in the same subnet as the device, such as 192.168.1.X.
It will take about 55 seconds to complete the boot up sequence after power on.
ARGtek Communication Inc.
www.argtek.com
E-Mail:sales@argtek.com Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742