The Front Led Indicator; Ap Router Configuration - ARGtek POWER KING-X ARG-1210 Quick Installation Manual
Wlan ap router
for 802.11b/g/n
Hide thumbs
Also See for POWER KING-X ARG-1210:
- Quick installation manual (18 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
[鍵入文字]
The front LED indicator
AP Router configuration
The AP Router is delivered with the following factory default parameters on the Ethernet LAN
interfaces.
Default IP Address: 192.168.1.254
Default IP subnet mask: 255.255.255.0
Web login User Name: <empty>
Web login Password: <empty>
The device has three operation modes (Gateway/Bridge/WISP).
The default IP addresses for the device are 192.168.1.254, so you need to make sure the IP
address of your PC is in the same subnet as the device, such as 192.168.1.X.
It will take about 55 seconds to complete the boot up sequence after power on.
ARGtek Communication Inc.
www.argtek.com
E‐Mail: sales@argtek.com Tel:+ 886‐2‐2999‐6958 Fax :+ 886‐2‐2999‐7742
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the POWER KING-X ARG-1210 and is the answer not in the manual?