1. Manuals
  2. Brands
  3. ARGtek Manuals
  4. Network Router
  5. CPE2512
  6. Manual

ARGtek CPE2512 Manual

Hide thumbs
1
2
3

Advertisement

Table of Contents

1. Check the parts in your box

CPE SET
DC 12V @ 1.25A/1.5A Power Adapter
PoE DC Power Injector
Hose Clamps
CD user manual
2. How to fix the CPE on the Pole (1"- 1.5")
(For better water resistance please wrap the RJ45 connector)
1
1
1
2
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPE2512 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ARGtek CPE2512

Summary of Contents for ARGtek CPE2512

  • Page 1 1. Check the parts in your box CPE SET DC 12V @ 1.25A/1.5A Power Adapter PoE DC Power Injector Hose Clamps CD user manual 2. How to fix the CPE on the Pole (1”- 1.5”) (For better water resistance please wrap the RJ45 connector)

  • Page 2: Poe Connection

    3. PoE connection 1. Connect (POE) RJ45 Jack to CPE RJ45 Jack with good quality Ethernet cable. 2. Connect (LAN) Jack to PC or Switch Hub LAN port. 3. Plug in the power adaptor to PoE DC jack. 4. CPE Connection 1.

  • Page 3: Cpe Configuration

    5. CPE configuration The WLAN Broadband Router is delivered with the following factory default parameters on the Ethernet LAN interfaces. Default IP Address: 192.168.1.254 Default IP subnet mask: 255.255.255.0 WEB login User Name: <empty> WEB login Password: <empty> The device has three operation modes (Gateway/Bridge/WISP). The default IP addresses for the device are 192.168.1.254, so you need to make sure the IP address of your PC is in the same subnet as the device, such as 192.168.1.X.

Table of Contents