Setting up the wireless router in Router mode
In the Router mode, the wireless router connects to the Internet via PPPoE,
Automatic IP, PPTP, LTP, or Static IP, and provides you with wireless radio
signals. The NAT, firewall, and IP sharing services for LAN clients are enabled.
To set up the wireless router in Router mode:
1. Connect your devices.
Note: We recommend that you use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial configuration to avoid possible setup problems due to
wireless uncertainty.
. Launch your web browser and the QIS web page appears automatically. Select
Wireless Router mode, then click Save.
Note: If the QIS web page does not appear after you launched your web browser, disable the
proxy settings on your web browser.
1
RT-N10E
RT-N10E
Modem
Chapter : Setting up the hardware