System Menu - Sony EVI-HD7V Operating Instructions Manual

SYSTEM Menu

IR-RECEIVE (infrared signal
reception)
When this is set to OFF, the camera does not
receive the signal from the supplied remote
commander.
Be sure to keep it set to ON when you use the
supplied remote commander.
Note
You cannot set IR-RECEIVE to OFF when
you operate the menu using the supplied
remote commander. To set it to OFF, use the
appropriate VISCA command.
For detailed information on how to connect
and VISCA command list, refer to the
Technical Manual of the camera. For details
on obtaining a Technical Manual, consult
your Sony dealer.
DISPLAY INFO
When this item is set to ON, the message
automatically appears for about 3 seconds
on the monitor screen, when you perform the
following operations using the supplied
remote commander.
Message
PRESET n : OK You have stored the
("n" is a preset camera settings to
position number POSITION 1 to 6.
between 1 and 6)
RECALL n : OK You have recalled the
("n" is a recall camera settings stored
position number in POSITION 1 to 6.
between 1 and 6)
66
SYSTEM Menu
When
Message
RESET n : OK You have reset the
("n" is a reset camera settings stored
position number in POSITION 1 to 6 to
between 1 and 6) the default settings.
One push WB : OP During the white
balance adjustment in
the ONE PUSH white
balance mode, the
message blinks on the
screen.
One push WB : OK When the white
balance adjustment has
been done correctly in
the ONE PUSH white
balance mode, the
message is lit on the
screen.
One push WB : NG When the white
balance adjustment has
failed in the ONE
PUSH white balance
mode, the message
blinks on the screen.
COLOR SYSTEM
Select the color format for video output from
the VIDEO OUT connector.
Select from RGB or YPbPr based on the
specifications of the monitor connected.
When