Sony EVI-HD7V Operating Instructions Manual page 56

• Be sure to use a Phillips-head screwdriver
when changing the switch position. If you
use a tool other than the designated
screwdriver, the crossed groove may be
damaged.
• This camera does not include a function
that automatically selects video output
signals based on the DVI monitor's
resolution. Be sure to configure settings
based on the monitor manually.
• HDTV video signal outputs display
without distortion on monitors with 16:9
aspect ratios.
Set this arrow to
the desired video
format.
Switch Video EVI-HD7V
position format support
1920×1080p
0
/59.94
1920×1080p
1
/29.97
1920×1080i
2
/59.94
1280×720p/
3
59.94
1280×720p/
4
29.97
640×480p/
5
59.94(LB)
No output
6
VISCA
7
CONTROL
56
Location and Functions of Parts and Controls
EVI-HD3V
support
Yes No
Yes No
Yes No
59.94 Hz
system
Yes Yes
Yes Yes
Yes Yes
– – –
Yes Yes –
Switch Video EVI-HD7V
position format support
1920×1080p
8
/50
1920×1080p
9
/25
1920×1080i
A
/50
1280×720p/
B
50
1280×720p/
C
25
D No output
No output
E
No output
F
Yes: Outputs the image signal.
No: Does not output the image signal.
LB: Abbreviation of LETTER BOX. A
video signal with the 16:9 aspect ratio
is output by adding a blank area (no
signal, black) top and bottom to
display the image without distortion on
a monitor that uses the 4:3 aspect ratio.
Notes
• If the switch position is set to "no output,"
the POWER lamp and STANDBY lamp
will both remain lit. In such cases, control
via the remote commander and VISCA
commands is disabled.
• The VISCA CONTROL switch position
allows you to configure the video format
via external communication. However,
video output will take longer compared to
other switch positions.
For detailed information, refer to the
Technical Manual of the camera. For details
on obtaining a Technical Manual, consult
your Sony dealer.
EVI-HD3V
support
Yes No
Yes No
50 Hz
Yes No
system
Yes Yes
Yes Yes
– – –
– – –
– – –