Pbx Feature Menu; Flexible Key Display - Panasonic KX-TCA155 Operating Instructions Manual

PBX Feature Menu

Functions of the PS can be activated through the display key list.
Move the joystick left to display the key list.
1 2
0
Pause

Flexible Key Display

A flexible key can be used either to seize a line in order to make or receive an outside call
(F-CO key), or used as a function key. Move the Joystick right to display the flexible key list.
The icon shown beside each F-CO key indicates line status similarly to the LED indicators
on a Proprietary Telephone;
Example:
1:Single Line
2:Trunk Group
3:Loop Line
key number
• * The meanings of these icons vary depending on the status of the CO line.
• For further information, refer to "LED Indication" in the KX-TDA series Business
Telephone System Feature Guide.
• To select a key, press its key number, or move the Joystick
desired key then press
• To assign a function to a flexible key, see page 40.
1
3
2
3
0
is the same as a green LED;
Understanding the icons for the F-CO key*
(on): You are currently using this line.
(flashing rapidly): You have an incoming call on this line.
(flashing slowly): You have a call on hold on this line.
(on): This line is in use by someone else.
(flashing rapidly): There is an incoming call received by an
(flashing slowly): Someone has a call on hold on this line.
(no icon): This line is idle.
Before Operating the PS
Pause:
Inserts a dialling pause.
FWD/DND:
Sets Call Forwarding or Do Not Disturb.
Message:
Used to leave a message waiting indication or
call back the party who left you a message
waiting indication.
Search Wave:
Searches the strongest radio signal coming
from the Cell Station.
PBX Program:
Enters the PBX programming mode.
incoming call distribution group to which
"Ring" is set as the group call distribution
method.
.
is the same as a red LED.
to select the
11