PBX Feature Menu
Functions of the PS can be activated through the display key list.
Move joystick left to display the key list.
1
2
0
Pause
Flexible-CO Key
The F-CO key can be used to seize an idle outside line while making or receiving an
outside call, or used as a feature button. Move Joystick right to display the F-CO key list.
Icons shown in the F-CO list function similarly to the LED indicator on a Proprietary
Telephone.
Example:
1:Single line
2:Group line
3:Loop line
key number
• * The meanings of these icons vary depending on the status of the CO line.
• For further information, refer to "LED Indication" in the KX-TDA series Business
Telephone System Feature Guide.
• To select a key, press its key number, or press
then press
1
3
2
3
0
is the same as a green LED, and
Understanding the F-CO Key List
(on): You are currently using this line.
(flashing rapidly): You have an incoming call on this line.
(flashing slowly): You have a call on hold on this line.
(on): This line is in use by someone else.
(flashing rapidly): There is an incoming call received by an
(flashing slowly): Someone has a call on hold on this line.
(no icon): This line is idle.
.
Before Operating the PS
Pause:
Inserts a dialing pause.
FWD/DND:
Sets the Call Forwarding or Do Not Disturb
features.
Message:
Used to leave a message waiting indication or
call back the party who left the message waiting
indication.
Search Wave:
Searches the strongest radio signal from the
base unit.
PBX Program:
Used to enter or exit the programming mode.
is the same as a red LED.
incoming call distribution group to which
"Ring" is set as the group call distribution
method.
to highlight the desired key
11