Sharp MD-ST500 Operation Manual page 54

MD-ST500
USING WITH THE ALKALINE BATTERY
(page 33)
1. Open the battery case supplied with the unit.
2. Insert the AA size battery [LR6] into the battery
case by matching it + and – terminals to the dia-
gram in the battery case, and then close the
battery case.
3. Align the protuberances on the battery case with
the indentations on the side of the unit.
4. Turn the fixing screw on the battery case toward
the word "LOCK", and then make sure that the
battery case does not move.
G When using this MD headphone player with an
alkaline battery, keep the rechargeable battery
in the main unit.
G Do not insert a rechargeable battery (such as
nickel-cadmium rechargeable battery) into the
battery case.
CHANGE THE INITIAL SETUP (pages 34-35)
1. Insert a MiniDisc.
2. Hold down the
for 2 seconds or more while in the stop mode.
After "SET UP" is displayed, "BEEP on" or
"BEEP off" will be displayed.
3. Press the
you want to change.
BEEP on autoPLAY
54
button on the remote control
MODE
or button to select the menu
autoPS LIGHTnor
4.Press the button to select the item you
MODE
want to change.
Beep sound
Auto play
Auto power save
Operation indicator
Display on the remote control
Backlight on the remote control
"LIGHTnor"
Operation indicator
Display on the remote control Indicated.
Backlight on the remote
control
"LIGHTall"
Operation indicator
Display on the remote control Indicated.
Backlight on the remote control Lit.
"LIGHToff"
Operation indicator
Display on the remote control Indicated for approx.
Backlight on the remote
control
(*) G The indicator blinks for several seconds when
an MD is inserted.
G It does not go out while charging.
5. When the setup is completed, press the
MD-ST500
OFF
ON
BEEP off
BEEP on
autoPLAY PL off
autoPS PS off
See below.
Flashing.
Lit for approx. 10 seconds
when operated.
Flashing.
Goes out.(*)
10 seconds when operated.
Lit for approx. 10 seconds
when operated.
button.