Sharp MD-ST500 Operation Manual page 50

MD-ST500
HOLD FUNCTION (page 21)
To avoid operations by accidentally pressing the
buttons, use the hold function.
Main Unit:
Hold down the
more.
You will hear one beep.
Then "HOLD on" will appear on the remote control.
To cancel the hold mode, press the
button for 2 seconds or more.
You will hear two beeps.
Then "HOLD off" will appear on the remote control.
Remote Control Unit:
To put the unit in the malfunction prevention state,
move the switch in the direction of the arrow.
HOLD
To cancel the hold mode, return the
its original position.
TRACK SEARCH (page 22)
To move to the beginning of the next track :
During playback, press the
To fast-forward audibly (Cue):
During playback, hold down the
Playback will start when you release the button.
To move to the beginning of the track you
are listening to :
During playback, press the
To fast-reverse audibly (Review):
During playback, hold down the
Playback will start when you release the button.
50
button for 2 seconds or
:OFF-HOLD
HOLD
button once.
button.
button once.
button.
To search a track:
1. While in the stop mode, press the
button on the remote control.
2. Press the
The selected track will be played back.
INTRO PLAY (page 23)
This function plays the beginning of each track for 9 sec-
onds.
1. Press the MODE button on the remote control
:OFF-HOLD
to enter the normal playback or all track repeat
playback mode.
2. While playback is stopped, hold down the
ton on the remote control for 2 seconds or more.
3. Press the
you wish to listen. Normal playback will resume.
switch to
Note:
Intro play cannot be operated with the
the main unit.
SWITCHING PLAYBACK MODES (pages 24 - 25)
Press the MODE button on the remote control dur-
ing playback.
MY, MY
tracks are registered on MiniDisc.
button.
button when you reach the track
No display
, are displayed only when the favorite
MD-ST500
or
but-
button on