Sharp MD-ST500 Operation Manual page 49

CHARGING THE RECHARGEABLE
BATTERY (pages 12-13)
Charge the rechargeable battery according to the
following procedure.
1. Insert the rechargeable battery.
(1) Open the battery compartment cover.
(2) Insert the – mark of the battery first.
(3) Close the battery compartment cover.
2. Plug the AC adaptor into an AC outlet (AC 100V)
and plug the other end into the DC IN 5V jack on
the battery charger.
3. Place the main unit on the battery charger with
its front toward you.
G The operation indicator will flash, and the battery
will begin to be charged.
G Battery charging will be completed in 3.5 hours.
When battery charging is completed, the opera-
tion indicator will go out.
G Use only the attached rechargeable battery (AD-
N55BT).
MINIDISC PLAYBACK (pages 16-20)
1. Plug in the remote control and headphones.
G Insert the plug fully.
2. Insert a MiniDisc.
(1) Move the OPEN knob in the direction shown
by the arrow to open the disc holder.
(2) Insert the arrow end of the MiniDisc first,
while pushing the center of the MiniDisc.
(3) Close the disc holder.
G When the disc holder is closed, the power is turned on
and the playback is started automatically (Auto play).
If the unit will not be used right after loading the
MiniDisc, turn off the power.
3. Adjust the volume by pressing the
button.
4. Press the BASS button on the remote control
repeatedly to adjust the bass.
BASS1 Slightly emphasized
BASS2 More emphasized
BASS3 Greatly emphasized
BASS0 Not emphasized
To interrupt playback:
Press the button on the remote control during play-
back.
Press the button again to resume playback.
To stop playback:
Press the button during playback.
In about 2 minutes after playback is stopped or paused
and left as it is, the unit will be automatically turned off.
To turn off the power:
Press the button while the playback is stopped.
MD-ST500
MD-ST500
or
VOL VOL
49