Sharp MD-ST500 Operation Manual page 52

MD-ST500
To cancel all favorite tracks:
1. Insert a MiniDisc with "favorite tracks".
2. Hold down the MODE button on the remote con-
trol for 2 seconds or more while in the stop mode.
3. Select "MY-DEL" by pressing the
ton on the remote control and press the MODE but-
ton.
4. Press the MODE button. All favorite tracks on the
MiniDisc are now canceled.
CHECKING DISPLAYS (pages 28-29)
To check the elapsed playing time and re-
maining playing time:
Press the
DISPLAY
peatedly during playback.
Elapsed
Track name
playing time
To check the total playing time:
While playback is stopped, press the
ton on the remote control repeatedly to select the
total playing time or the disc name.
G If the track or the disc is not named, "NoNAME"
is displayed.
G The display varies according to the playback
mode (group, favorite track).
G This unit can display katakana characters which
conform to the MD standard specifications.
52
or
button on the remote control re-
Remaining
playing time
DISPLAY
To check the playing time of each track:
1. W h i l e p l a y b a c k i s s t o p p e d , p r e s s t h e
or
lect the track number or track name.
but-
2. Press the
Once the playing time is displayed, you can
check the playing time of other tracks simply by
selecting them with the
To check service life of the battery:
When a rechargeable battery or the alkaline battery
is used, its remaining amount is displayed.
As the battery charge drops from use, the bars in
the charge indicator will go out one by one.
G When the battery is run down, "LoBATT" appears
on the display and the power is turned off.
G The battery remaining amount may not be
displayed steadily for approximately 20 seconds
Disc name
after the power is turned on.
G The remaining amount is not displayed if the unit
is used on the battery charger.
but- G The number of bars shown in the battery indicator
may change depending on the operation being
performed.
G If you use a battery which you stopped charging
halfway, "
the battery is completely charged.
button on the remote control to se-
button on the remote control.
DISPLAY
or
" may appear. It does not mean that
MD-ST500
button.