Removing The Camera Module; Replacing The Camera Module - Dell Inspiron N5110 Service Manual

Back to Contents Page
Camera Module
Dell™ Inspiron™ N5110 Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Camera Module
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Follow the instructions from
4. Remove the display assembly (see
5. Remove the display bezel (see
6. Remove the display panel (see
7. Gently peel the camera module from the from the display back cover.
8. Remove the camera module.
1 camera module cable connector
Replacing the Camera Module
1. Follow the instructions in Before You
2. Use the alignment posts on the display back cover to place the camera module in position and adhere it in place.
3. Replace the display panel (see
4. Replace the display bezel (see
5. Replace the display assembly (see
Begin.
Battery).
step 3 to step 9 in Removing the Palm-Rest
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
2 camera module
Begin.
Replacing the Display Panel).
Replacing the Display Bezel).
Replacing the Display Assembly).
Removing the Battery) before working inside the
Assembly.