Display-Panel Brackets - Dell Inspiron N5110 Service Manual

1 display cable 2 tape
Replacing the Display Cable
1. Follow the instructions in Before You
2. Connect the display cable to the display-board connector and secure it with the tape.
3. Replace the display panel (see
4. Replace the display bezel (see
5. Replace the display assembly (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Display-Panel Brackets
Removing the Display-Panel Brackets
1. Follow the instructions in Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Remove the four screws (two on each side) that secure the display-panel brackets to the display panel.
Begin.
Replacing the Display Panel).
Replacing the Display Bezel).
Replacing the Display Assembly).
Begin.
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).