Toshiba M645-S4080 Maintenance Manual page 43

2 Troubleshooting Procedures
AC-IN LED
Solid on
Off
To check the power supply status, install a battery pack and connect an AC adaptor to the
DC-IN port on the computer and to a power supply.
If the DC-IN LED or Battery LED is not lit, go to Procedure 2.
Procedure 2
A faulty adaptor may not supply power or may not charge the battery. Perform Check 1.
Check 1 Connect a new AC adaptor. If the problem is not resolved, go to Check 2.
Check 2 Insert a new battery. If the problem is still not resolved, go to Procedure 3.
Satellite/Satellite Pro M600/M640/M645/M647 Series/Dynabook TX/AX Series Maintenance Manual
Downloaded from LpManual.com Manuals
Table 2-2 DC-IN LED
Power supply status
AC power exists (LED is solid White).
No AC power exists.
Adaptor / battery replacement
11