Environmental Information; Factory Initialization Mode - Philips SKM7488NC User Manual

DECT2_Book.qxd 03-06-2005

Environmental information

Disposal of your old product
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a
product it means the product is covered by the European
Directive 2002/96/EC.
Please inform yourself about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not dispose of
your old products with your normal household waste.The
correct disposal of your old product will help prevent potential
negative consequences for the environment and human health.

Factory initialization mode

In this mode both units can be reset to the default factory
settings. Factory initialization can be used if problems occur
which can not be solved by following the suggestions in chapter
'Troubleshooting'. Resetting must be done separately for each
unit.
1 Press and hold the On/Off (y) button (A-1, B-5) for
2 seconds to switch on the units.
2 When the LINK lights (A-2, B-7) on the units light up,
immediately press and hold the volume – button
(A-4, B-9) for 1 second.
> The units have now been reset to the default factory
settings.
14:44 Pagina 17
Important information
EN
17