Front Panel Description - Rane AM1 Manual

FRONT PANEL DESCRIPTION

MIC INPUTS
1 2
SIG LEVEL OL SIG LEVEL OL
1
1 MIC INPUT LEVEL controls adjust the mic input gain. The green Signal indicators inform of audio presence. Overload
indicators warn of excessive signal levels.
2 MIC MIX LEVEL control adjusts the volume of all mixed microhones, including all upstream microphones when cascading
additional mics from a Rane AM2 (sold separately). Signal and Overload indicators inform and warn.
3 AUX 1 & AUX 2 MIX LEVEL controls alter the mix volume of the Aux 1 and Aux 2 inputs, respectively. Corresponding Signal
and Overload indicators flank each.
4 USB MIX LEVEL control adjusts the mix volume of the USB audio received from a computer connected to the rear panel USB
Audio jack. Signal and Overload colors are reminiscent of holiday lights.
5 Main OUTPUT LEVEL control adjusts the level of the mix exiting the XLR output and the RAD Port output. The Record
Output level is not affected by this control.
6 PHONES SOURCE cue switch selects which audio is heard in the headphone outputs: the mix of all Mics, the Aux 1 input, the
Aux 2 input, the USB audio input, or the Main Output. This allows listening in headphones to any single input before turning
each up in the mix using the MIX controls, or listening to the main mix before turning it up in the PA for the world to hear.
7 PHONES LEVEL control adjusts the volume of both the 3.5 mm and ¼" headphone jacks.
8 PHONES include both 3.5 mm and ¼" headphone jacks for either size headphone plug.
9 LOCATE indicator helps system installers identify a specific AM1 Automixer when using Rane's Mongoose Tracker or Halogen
software.
0 POWER indicator lights whenever adequate power is applied to the unit.
Manual-2
3 4 MIC MIX
SIG LEVEL OL SIG LEVEL OL SIG LEVEL OL
2
MIX
AUX 1 AUX 2 USB
SIG LEVEL OL SIG LEVEL OL SIG LEVEL OL
3 4
PHONES
OUTPUT SOURCE
AUX 2
AUX 1 USB
MICS OUTPUT
SIG LEVEL OL LEVEL
5 6 7
AM1
AUTOMIXER
LOCATE POWER
8 90