Table of Contents
Related Manuals for Rane AM1
Summary of Contents for Rane AM1
- Page 1 AUTOMIXER...
-
Page 2: Important Safety Instructions
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by Rane Corporation could void the user's authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. -
Page 3: Quick Start
Output feeds a microphone input, select the MIC position. Connect the computer’s USB port to the USB Audio jack. a shielded CAT 5e cable (or better) from the AM1 to either the Once the Windows® or Apple® operating system recognizes the wall plate RJ-45, or to a Rane HAL, EXP or Mongoose RAD AM1 as a stereo I/O device, the rear green USB light illuminates. -
Page 4: Front Panel Description
7 PHONES LEVEL control adjusts the volume of both the 3.5 mm and ¼" headphone jacks. 8 PHONES include both 3.5 mm and ¼" headphone jacks for either size headphone plug. 9 LOCATE indicator helps system installers identify a specific AM1 Automixer when using Rane’s Mongoose Tracker or Halogen software. -
Page 5: Rear Panel Description
13 WATTS CLASS 2 WIRING 1 AC Power IEC input accepts electrons to power up the AM1. Though it is first in this list, it’s best to connect it last. 2 FAULT indicator lights when something goes awry. LOCATE indicator flashes when toggled from the Mongoose Tracker or Halogen software. When using multiple AM1 devices in a Rane Mongoose or HAL system, this uniquely identifies a specific AM1. - Page 6 IN port to a Rane AM2’s CASCADE OUT port to add more anced (only two conductors), see the Sound System Interconnec- mics to the mic mix of an AM1. All four CASCADE IN Status tion RaneNote elsewhere in this manual or on Rane’s website for Indicators illuminate when the two devices recognize each other.
-
Page 7: Operation
USB Charge-Only port. For other With the Source set to Output, the entire mix is heard. Use audio sources , use the Aux 1 RCA jacks. Since the AM1 mix is the four gray Mix knobs to adjust the relative volume of each mono, audio at these two stereo inputs is monoed upon entering source. - Page 8 AM1 CASCADE IN port. Doing so allows all 12 mixed micro- RAD PORT Status indicators are defined below: phones (eight AM2 + four AM1) to be heard at the AM1’s Main, AUdIO TX LED – lights green when communications with the Record, USB Audio and RAD Port Outputs.
- Page 9 USB AUDIO I/O Windows Vista: Since the AM1 appears as a standard Windows or Mac stereo Classic View playback and record device, you can simultaneously record the Start -> Settings -> Control Panel -> Sound -> Playback (tab) and Record (tab) Control Panel Home AM1 Main Mix and playback audio via the USB.
- Page 10 Windows XP, Vista and 7 is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Apple, Mac, Macintosh, iPod, iPad, iPhone and iTunes are trademarks of Apple Computer, Inc., registered in the US and/or other countries. ©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5000 TEL 425-355-6000 FAX 425-347-7757 WEB rane.com Manual-8...
Need help?
Do you have a question about the AM1 and is the answer not in the manual?
Questions and answers