Operation; On/Off; Clock; Setting The Time - GME g-radio GR300BT Instruction Manual

LCD Display
Auto Music Search
Preset Memories
Treble
Bass
Balance
Frequency and Status

ON/OFF

To switch the GR300BT ON, briefly press the
To switch the GR300BT OFF, press and hold the
Note: When the GR300BT is switched off, it will remember the last state it was set to
and return to that state when switched back on.

CLOCK

When the GR300BT is switched off, the LCD will (by default) display the time for as
long as the power remains connected. When the GR300BT is switched on, the LCD
will normally display the radio settings, but can be manually switched between the
radio and the clock. To toggle the display between the radio and the clock, briefly
press the DIS key.
If any of the radio function keys are pressed while the LCD is in clock mode,
Note:
the LCD will temporarily switch back to the radio display to allow you to make
adjustments and set stations and frequencies. The LCD will then return to the clock
mode after a few seconds.

Setting the Time

1. Briefly press the DIS key to switch to the clock display.
2. Hold the DIS key until the 'Hours' flash.
3. Rotate the Control Knob left or right to adjust the hours. Rotate right to step
forward or left to step backwards.
4. Once the Hours have been set, briefly press the DIS key. The 'Minutes' will flash.
5. Rotate the Control Knob to adjust the minutes. Rotate right to step forward or
left to step backwards.
6. Briefly press the DIS key again to exit and display the time.
GR300BT
FM Bands

OPERATION

INSTRUCTION MANUAL
AM Bands
AUX
Auxiliary Input
key.
key.
Local/DX
Loudness
Stereo
kHz
MHz
5